Subwoofer Cables

Most Popular

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

Listing ID

UPC Code

Solid .5% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.

AudioQuest® Irish Red 5.0 m RCA Subwoofer Cable

Solid .5% Silver Conductors For Improved Subwoofer Performance

It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.

AudioQuest® Irish Red 12.0 m RCA Subwoofer Cable

AudioQuest® Irish Red 20.0 m RCA Subwoofer Cable

Specifically designed for single-ended applications, Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer and more dynamic experience.

AudioQuest® Boxer RCA Subwoofer Cable (8.0 m / 26'3")

The Boxer breed originated in Germany in the late 19th century and was brought to the US after World War I. Today, Boxers are a part of the AKC’s Working Dog Group. Don’t be fooled by that “worried” look on a Boxer’s face. Boxers are known for their fun-loving, genial, and at times downright clown-like demeanor, as well as their remarkable rapport with children. However, Boxers are equally known for courage in the face of danger, or threat to family or loved ones. The Boxer’s innate intelligence, combined with its natural strength of stature, makes it a breed beloved by many.

Carbon-Based 3-Layer Noise-Dissipation System (NDS)

Cold-Welded, Hanging-Silver Directly Over Pure Red Copper Terminations

Solid 1.25% Silver Conductors For Improved Subwoofer Performance

Solid 1.25% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.

Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials.

Specifically designed for single-ended applications, Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

Subwoofer Cables

AudioQuest® Boxer RCA Subwoofer Cable (8.0 m / 26'3")

$519.95

AudioQuest® Boxer RCA Subwoofer Cable (8.0 m/26'3")

$519.95

AudioQuest® Irish Red 5.0 m RCA Subwoofer Cable

$199.95

AudioQuest® Irish Red 12.0 m RCA Subwoofer Cable

$339.95

AudioQuest® Irish Red 20.0 m RCA Subwoofer Cable

$499.95

AudioQuest® RCA Irish Red Subwoofer Cable (5.0 m/16'4")

$199.95

AudioQuest® RCA Irish Red Subwoofer Cable (12.0 m/39'4")

$339.95

AudioQuest® RCA Irish Red Subwoofer Cable (20.0 m/65'7")

$499.95

ONECALL

Helpful Information

ONECALL

Connect with Us

Payment Methods